Grade 2 Flush Contact 4 Terminal Single Reed Flush Contact Tamper Resistors (Brown)

Grade: 2
Model: A41MULTIB

A Grade 2 contact easily suited to most intermediate installations. Ideal for double door / shared zone use.

A41MULTI features a variety of integral resistors, providing 2 wire EOL installation capability. The resistors will suit a wide range of the most popular panel brands such as; Honeywell, Ademco, Orisec, Scantronic, Menvier, Texecom, Pyronix, Castle, Aritech, Europlex, Gardtec, HKC, Guardall and Inner Range Control Panels.

The resistors are supplied on a set of 4 modules – these are to be inserted into the PCB in order to select the desired configuration. A no-resistor combination provides traditional 4-wire capability where desired.

Wiring is completed using four wire clamping screw down terminals on the PCB.

A microswitch tamper provides detection of removal from the fitting recess.

Along with fitting screws, A41MULTI is also supplied with a contact sheath – useful for installations where the fitting recesses have drilled a little wider than 20mm or are otherwise awkward.

Environmental Class

II – Indoor uncontrolled

Terminals

4 terminal

Tamper

Microswitch

Make Distance

~14mm

EOL Resistors

1k, 2k2, 4k1, 4k7, 5k6, 10k

Alarm Resistors

1k, 2k2, 4k1, 4k7, 5k6, 6k8, 10k

Barrel Dimensions

CONTACT: 19mm diameter, 27mm deep (22mm diameter, 31mm deep with sheath)

MAGNET: 22mm diameter, 25mm deep

Please click on the links below to download the relevant document for this product
Please click on the links below to view the relevant videos
Back to top